Washer Disinfector Specifications
The Washer Disinfector is a heavy-duty, high volume, single chamber, cabinet style washer designed for thorough and efficient cleaning of laboratory glassware, utensils, and miscellaneous items used in research and healthcare facilities.
Washer Disinfector size:
Washer Disinfector Compartment usable space: 26” wide x 26" high x 29" deep
Washer Disinfector Overall Unit*”: 42" wide x 80" high x 36" deep Sliding Door(s)
Washer Disinfector Surgical Instrument Washer features:
Washer Disinfector load and unload configuration: (select one):
Washer Disinfector front load and unload: pass through load and unload The Washer Disinfector is provided with an unload door and an additional cycle status indicator on the unload end, allowing one-way product flow from the contaminated area to the clean area. Washer Disinfector shall be provided with a combination of rotating jet spray and direct spindle spraying for all treatment solutions. The Washer Disinfector spray system consists of a single rotating spray arm mounted above, and interchangeable spindle wash or a rotating jet spray arms mounted below for internal treatment of the racked items. The Washer Disinfector bottom header automatically couples to the re-circulated wash/rinse treatment system. Washer door(s) shall be provided with a full view, tempered, double glass viewing window.
Washer Disinfector stainless steel treatment components:
All Washer Disinfector treatment components, including jet spray system, screens, pump, and recirculating piping are constructed of 304 stainless steel.
Opening the Washer Disinfector load-end door (or unload-end if pass-through unit), automatically stops operation of the washer. The Washer Disinfector door(s) must be closed, alarm acknowledged, and the Cycle Start button depressed to continue operation.
A Washer Disinfector solid-state microcomputer control system monitors and automatically controls all process operations and functions. A Washer Disinfector twelve-cycle treatment menu may be programmed and retained to permit operating personnel to accommodate a wide variety of loads and processing requirements. Individual cycle phase times and temperatures and other key process parameters are programmable. Each Washer Disinfector cycle may be locked by supervision to ensure process integrity. The Washer Disinfector Cycle programming may be controlled by a supervisory access code. Each cycle program may be reviewed on demand.
Washer Disinfector automatic treatment cycles:
The standard Washer Disinfector treatment cycle consists of any or all of the following phases: Pre-wash, Wash, Rinse, Wash II, Rinse and Final Rinse. All cycle phases may be selected or deselected by the user. All Washer Disinfector Wash and Rinses treatments are re-circulated under pump pressure except the optional non-re-circulated rinse. The cycle, once activated, is completely automatic.
Washer Disinfector debris screens:
Located in the Washer Disinfector sump, easily removable screens are provided to protect items and large debris from entering the recirculation system. Washer Disinfector WATER SAVINGS Water from the last rinse cycle may be held and utilized as the pre-wash of the next cycle.
Washer Disinfector temperature guarantee:
The Washer Disinfector operator may select to guarantee the temperatures for any re-circulated phase of the cycle. If the Washer Disinfector temperature guarantee is selected, the phase will not begin timing until the re-circulated water temperature reaches the set point. If the Washer Disinfector re-circulated temperature drops below the set point during the phase, the timer will stop. Once the Washer Disinfector set point temperature is again met, the phase-timer continues from where it stopped thus assuring the set temperature during entire treatment phase time.
Washer Disinfector operation:
The Washer Disinfector operator loads the items to be cleaned in the wash chamber, closes the door, selects the proper cycle, and depresses the “Cycle Start” button. The Washer Disinfector proceeds through the treatment schedule and automatically shuts off at the completion of the cycle. The Washer Disinfector operator then opens door and removes the cleaned items.
Washer Disinfector treatment schedule:
Washer Disinfector PRE-WASH
Either Hot water from the house supply fills the Washer Disinfector sump, or Water remaining in the chamber sump from final rinse of the previous cycle is re-circulated through the jet system under pump pressure and pumped to drain upon completion.
Hot water from the house supply fills the Washer Disinfector sump and is pumped through the jet system. As required, a specified amount of detergent is added during recirculation using the OPTIONAL LYNX- supplied, or customer supplied detergent injection pumps. At the end of the treatment, the detergent solution is pumped to drain.
Washer Disinfector rinse:
Hot water from house supply fills the Washer Disinfector chamber sump and is re-circulated through the jet system under pump pressure to remove residual detergent. Re-circulated water is pumped to drain on completion of treatment.
Washer Disinfector detergent washes
Same as Washer Detergent Wash phase allowing a secondary detergent to be utilized.
Washer Disinfector purified water rinses:
Hot water from house supply fills the Washer Disinfector chamber sump and is re-circulated through the jet system under pump pressure to remove residual detergent. Re-circulated water is pumped to drain on completion of the Washer Disinfector treatment.
Washer Disinfector FINAL SANITARY WATER RINSE
The Washer Disinfector Load is sprayed with either re-circulated or an OPTIONAL non-re-circulated sanitary water system. At the end of the Washer Disinfector treatment, the water may be retained in the chamber sump for use as the pre-wash water in the subsequent load or directed down the facility drain. The Washer Disinfector Re-circulated phase is adjustable from 0 – 9999 seconds in 1-second intervals and 120F - 190F in 1 intervals.
The Washer Disinfector base, wash chamber and chamber sump are constructed of #304 Stainless Steel. The Washer Disinfector frame and cabinet, door and hardware are #304 Stainless Steel. The Washer Disinfector is provided with vertical sliding doors. The Washer Disinfector chamber door(s) are of double-wall construction A tempered double-pane, full view glass observation window is provided in each door. The Washer Disinfector is insulated with a moisture resistant protective covering. The Washer Disinfector chamber sump is equipped with a level control switch, automatic water fill port, and a stainless steel heating coil for the re-circulated treatment solutions. The Washer Disinfector control system displays and monitors re-circulated solution temperatures. The Washer Disinfector Sump is completely drained after each phase, preventing cross-contamination between treatment phases and cycles. All re-circulated treatments are under pressure of a stainless steel 3Hp pump. This Washer Disinfector system is equipped with a solid state pressure sensor. The Washer Disinfector is equipped with a transformer for the control circuit; integral Type-2 coordinated protective magnetic starters requiring no upstream fuses for overload protection of all motors, and all other electrical components required for the operation. An top-mounted light is provided to illuminate the wash chamber. The Washer Disinfector is equipped with pneumatically actuated valves to control the output of the pump to the jet system. The Washer Disinfector is inter-piped and inter-wired so that only one connection is required for each service or utility. The Washer Disinfector is supplied with four (4) threaded detergent injection ports and electrical pump connections. Washer Disinfector Programming is in Military time and Fahrenheit temperature. Times and temperatures are expressed in seconds and full-degree increments, respectively. A highly visible color touch screen displays cycle program data on demand and real-time in-process cycle Washer Disinfector performance. All cycle deviations are alarmed both visually and audibly and must be acknowledged by the Washer Disinfector operator. A modem is provided for online Washer Disinfector service diagnostics, evaluations, and software upgrades. If required by the customer, this system shall allow for immediate access to the unit’s control system by a factory service engineer. The factory trained personnel will have the ability to troubleshoot, identify Washer Disinfector system malfunctions, and recommend repairs to local maintenance personnel within minutes of a malfunction. A dedicated analog phone line is required to utilize the Washer Disinfector Modem feature. This washer is the ideal steris 444 Washer Disinfector replacement with improved operating efficiencies and fits into the steris 444 washer footprint with larger usable chamber size. As a steris 444 washer replacement the accessories of this washer and racks are interchangeable. Buy Washer Disinfectors with accurate times and temperatures and Washer Disinfector Detergent Enzyme Lubricant Cleaners that cut costs. Washer Disinfector Detergent Enzyme Lubricant Cleaners clean fast. Washer Disinfector Detergents are packaged as described above. Washer Disinfector Surgical Instrument Washer features: The Washer Disinfector is equipped with a dryer. Heated air is re-circulated throughout the chamber at a user-selected temperature: The Washer Disinfector is provided with automatic power activated doors. The Washer Disinfector operator may open and close the door(s) by the push of a button. The Washer Disinfector is provided with a cold-water inlet valve, integral with the drain line to add cold water during draining for assistance in reducing the effluent temperature. An Ethernet port is provided to permit the capability of downloading cycle real-time performance data to a remote computer terminal. Custom software may be provided to accommodate specific applications. The main control panel of the Washer Disinfector is inspected and labeled in accordance to the UL standards. The Washer Disinfectors equipped with an integral #316 Stainless Steel tank with level control, automatic fill and overflow protection. Heating is accomplished via either steam or electric heat up to 190F. washer disinfector, times and temperatures.
The Washer Disinfector is provided with a stainless steel trim flange to enclose the opening between one end of the washer and the masonry wall opening. A stainless steel modular wall assembly is designed and manufactured to enclose an open wall area or to create a wall barrier. All Washer Disinfector materials and fasteners are of stainless steel construction. A stainless steel washer disinfector transfer cart is provided to connect to the load or unload end of washer for accessories transportation and ease of loading of the washer.